• Cutting Lumber from Logs
    8:38

    George Vondriska provides tips on how to use a backyard saw mill to cut lumber from logs for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video. Saw mill provided by Logosol. For more information, visit www.logosol.us.

    Watch Now >>
  • Cutting a Log on a Band Saw
    3:54

    George Vondriska provides tips on how to use your band saw as a sawmill. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Counter-Top Pen Material
    2:37

    For a different look in your shop-made pens, try any of the various counter-top materials. Not only do they result in a beautiful pen, but you can get your materials for little or no money. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Comparing Aerosol Can Nozzles
    2:05

    When selecting an aerosol can to finish your woodworking project, pay special attention to the nozzle on the can. Many nozzles give you a choice for the spray pattern you’ll have, and George Vondriska shows why it’s important. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Coiling a Band Saw Blade
    1:48

    George Vondriska demonstrates how to properly coil and store a large band saw blade for DIY woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Cleaning a Rusty Table
    8:41

    George Vondriska demonstrates the best way to remove rust from a cast-iron tool table. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Clamp Blocks
    4:40

    If you’ve ever tried to clamp two pieces together that are cut at less than a 90-degree angle, you know how difficult it is to keep the joint from sliding around before it dries. George Vondriska has a neat trick to resovle this clamping challenge using clamp blocks. A WoodWorkers Guild of America (WWGOA) original

    Read more ยป

    Watch Now >>
  • Circle Jig on the Bandsaw
    6:13

    George Vondriska shows his shop-made circle jig solution for cutting a perfect circle on a band saw. A WoodWorkers Guild of America original video.

    Watch Now >>
  • Choosing a Brush for Your Top Coat
    2:55

    You’ve spent a lot of time on your project getting it ready to finish, so why not finish it right? If you’re going to apply four layers of stains or top coat with a brush, it’s important to use the proper brush for the job. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>