• 4:21

    Repair a Cracked Bowl Blank

    If you’re a woodturner, CA glue is one of your best friends. It’s perfect for doing spot repairs on your bowls and spindles. There are a variety of viscosities of cyanoacrylate glue available. I typically use medium or thick for these repairs. Accelerator for the glue isn’t a must, but it’s handy to have. In…

    Watch Now >>
  • Using CA Glue for Gluing Wet Wood
    3:00

    Using CA Glue for Gluing Wet Wood

    Working with a wet piece of wood for your next project? George Vondriska demonstrates in this woodworking video how to get that wet wood on the lathe using a dummy board for the lathe chuck. By using cyanoacrylate glue or CA Glue, George shows you’ll get a nice, strong adhesion that dries well despite being…

    Watch Now >>
  • Gluing Countertop Material for Turning
    5:08

    Gluing Countertop Material for Turning

    Solid countertop material is excellent for turning bowls and other projects on a lathe, but it’s important to properly glue together multiple layers before you start turning. The key is using the right glue. George Vondriska teaches you how to use CA glue from Titebond to create a tight, seamless seal that will last forever…

    Watch Now >>
  • CA Glue as a Pen Finish
    7:33

    CA Glue as a Pen Finish

    George Vondriska shows you how to use CA glue as a great alternative wood finish for the pens that you turn. A WoodWorkers Guild of America (WWGOA) original.

    Watch Now >>