• Handy Lathe Table Plans
    51:07

    Handy Lathe Table Plans

    George Vondriska provides handy lathe table plans for your workshop, making sure the lathe is at the proper height for your woodworking needs. From just two sheets of MDF, you can create a lathe table with a tool and lathe accessory drawer and an attachable tower with chest handles and stack of drawers.

    Watch Now >>
  • Mudroom Locker Plans
    48:35

    Mudroom Locker Plans

    Who doesn’t need more storage in their house for items you want out of site when you’re not using them. George Vondriska walks you through beautiful mudroom locker plans. This woodworking project video will demonstrate how to build a locker with a continuous grain front, soft close hinges, hard wood banding and other great features to improve the storage space in your house.

    Watch Now >>
  • Figuring Out Cut Angles for Woodworking Projects
    1:28

    Figuring Out Cut Angles for Woodworking Projects

    George Vondiska demonstrates a trick for using a piece of scrap wood to transfer cut angles in order to get a perfect fit for the not-so-straight edges on your woodworking projects.

    Watch Now >>
  • Classic Tool Chest
    41:36

    Classic Tool Chest

    George Vondriska takes you through the step-by-step process of making a classic tool chest for your woodworking shop. The tool chest has plenty of room for both large and small tools with 3 drawers and a deep well at the top. Follow George as he gives you detailed instructions on the best order for cutting and joining each interlocking part to ensure you finish with a durable tool chest for your shop. You’ll also have access to a downloadable PDF cut list and helpful notes.

    Watch Now >>
  • How to Make a Spline Jig
    5:30

    How to Make a Spline Jig

    Splines really add a lot to a project. Not only do they add a nice accent to your piece, but they also add more structural strength by reinforcing the joint. George Vondriska shows you step-by-step how to make a very simple spline jig using a scrap piece of 2″ x 4″ and some plywood. With…

    Watch Now >>
  • End Grain Cutting Board Plans
    27:41

    End Grain Cutting Board Plans

    In this woodworking project demonstration, George Vondriska teaches you how to build a long-lasting end grain cutting board that will look and work great in your kitchen. He walks through the cutting board plans step by step to show you how to build the board from scratch, including wood and pattern selection, initial layout, cut…

    Watch Now >>
  • How to Make a Wooden Pizza Peel
    21:58

    How to Make a Pizza Peel

    Watch this video and learn how to make a pizza peel (the big wooden spatula you’ve seen at wood-fired pizza restaurants) This useful, attractive, sturdy, Pin-worthy and giftable project is simple enough for beginners and would make a fun family project. Techniques discussed and demonstrated by WWGOA’s master woodworker George Vondriska include cutting wood with…

    Watch Now >>
  • Make a Picture into a Wood Jigsaw Puzzle
    3:21

    Turn Your Pictures Into Wooden Jigsaw Puzzles

    George Vondriska shows you how to use a scroll saw to turn any of your favorite pictures in to a wood jigsaw puzzle. He tells you which blade you should use depending on the thickness of your material and demonstrates some of the woodworking techniques you can utilize when cutting out the pieces.

    Watch Now >>
  • Knife Block Plans
    12:52

    Knife Block Plans

    George Vondriska demonstrates the simple woodworking techniques you’ll need to build your very own knife block that you can use in the kitchen. He gives you the proper measurements and teaches you how to make the cuts for each individual knife slot.

    Watch Now >>