• Using a Ring Tool
    2:42

    Using a Ring Tool

    George Vondriska introduces a better way to hollow end grain. You’ll end up with silky smooth cuts after using a ring tool followed by a scraper. George shows you how to use this cool specialty tool. It’s an inside-out approach on an egg cup.

    Watch Now >>
  • Using a Bowl Gouge
    5:51

    Using a Bowl Gouge

    Cut, don’t scrape your way to better bowl turning. George shows you how to get cleaner, faster cuts with less sanding with a 3/8″ bowl gouge. You’ll learn critical body position and movement along with a neat trick for kick free starts on the bowl rim.

    Watch Now >>
  • Shellac as a Turning Finish
    1:43

    Shellac as a Turning Finish

    Watch Dave Munkittrick demonstrate how to apply finish to a turned project right on the lathe. See what he adds to the shellac for a foolproof protective finish for nearly any woodturning project.

    Watch Now >>
  • Sanding a Cylinder
    1:45

    Sanding a Cylinder

    Sometimes, when turning a cylinder for your woodworking projects, you want it to be perfectly flat, but how do you accomplish that? George Vondriska shows you a foolproof sanding technique that he uses for making a cylinder flat from end to end. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Turning with a Chatter Tool
    3:53

    Turning with a Chatter Tool

    Chatter is not a desirable outcome in most turning situations. George Vondriska demonstrates a very decorative use of chatter on your woodworking projects using a special chisel: a chatter tool. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Turning Square to Round Spindle Transitions
    3:13

    Turning Square to Round Spindle Transitions

    Master woodworker George Vondriska demonstrates a simple woodworking technique to eliminate tearout on your spindle turnings when transitioning from your square blank to the round part of your design. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Sharpening a Skew Chisel
    4:03

    Sharpening a Skew Chisel

    In this free woodworking project video, George Vondriska provides tips for sharpening a skew chisel with a diamond stone. A sharp chisel will give you the best result when you are turning. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Turn an Offset Foot
    3:31

    How to Turn an Offset Foot

    Tired of the traditional straight legs on your tables and chairs? Try master woodworker George Vondriska’s method for turning an offset foot on the lathe which adds lots of interest to any woodworking project. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Turn a Perfect Tenon
    3:21

    How to Turn a Perfect Tenon

    Mortise-and-tenon joinery is one of the most reliable we have, but if your tenons are not sized properly or they are inconsistent, it can be difficult to assemble your projects. Master woodworker George Vondriska reveals a shop trick that you can use to turn a perfect tenon for your woodworking projects. A WoodWorkers Guild of…

    Watch Now >>