• Reading a Grinding Wheel
    4:11

    Reading a Grinding Wheel

    Is the wheel on your grinder ruining your expensive chisels? Not all grinding wheels are created equal. Master woodworker George Vondriska teaches you how to read the information on any grinding wheel so you can purchase the one that is best for sharpening your woodworking tools.

    Watch Now >>
  • Protect Your Air Guns
    1:05

    Protect Your Air Guns

    Although it’s not quite like winning the Masters Tournament, this is one tip you’ll never forget. An ounce of prevention can keep your air guns running at peak performance.

    Watch Now >>
  • Easier Clamping on a Band Saw Table
    4:33

    Easier Clamping on a Bandsaw Table

    It can be tricky to clamp fences and jigs to the top of a cast iron band saw table because the webbing on the underside of the table gets in the way of your clamps. Fear not, George Vondriska teaches you a simple technique to create a flush surface on the bottom of your band…

    Watch Now >>
  • Drill & Tap Cast Iron
    5:02

    Drill and Tap Cast Iron

    Woodworkers drill holes in wood all the time but hesitate when it comes to cast iron. Threaded holes in cast iron machine tables are just the solution you need for holding jigs and fixtures. George Vondriska shows how to cut a threaded through or blind hole in cast iron with a center punch, drill, tap…

    Watch Now >>
  • Cutting Plugs / Using Plug Cutters
    5:41

    Cutting Plugs and Using Plug Cutters

    Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.

    Watch Now >>
  • Cutting Laminate on a Table Saw
    1:26

    Cutting Laminate on a Table Saw

    Master woodworker George Vondriska demonstrates the best way to safely cut perfectly straight plastic laminate with your table saw. You’ll learn that all you need are a couple of scraps to make a handy foolproof woodworking jig.

    Watch Now >>
  • Bridge Over Broken Guitar
    6:36

    Bridge Over Broken Guitar

    Is the bridge of your guitar separating from the guitar top? You can save big bucks by making the repair yourself. You probably already have all the woodworking tools you need in your shop to fix the broken guitar, and if you follow master woodworker George Vondriska’s step-by-step directions in this video, you’ll gain all…

    Watch Now >>
  • Biscuit Joiner on a Router
    4:05

    Biscuit Joiner on a Router

    Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.

    Watch Now >>
  • Bending Wood with a Hot Pipe
    2:56

    Bending Wood with a Hot Pipe

    Bending wood is one of those techniques that can have a dramatic effect on a woodworking project, but many woodworkers shy away from it because it seems intimidating. Watch this demonstration by our expert woodworker George Vondriska to learn a simple, worry-free approach to bending wood quickly using a heated iron pipe.

    Watch Now >>