• Shellac-Priming Edges
    2:49

    Shellac-Priming Edges

    MDF is a great surface for paint, but the factory-cut edges can look fuzzy or dull after painting. George Vondriska teaches you a simple two-step shellac-priming process to get great-looking painted MDF edges every time.

    Watch Now >>
  • Top Coat Overview
    6:42

    Top Coat Overview

    There are LOTS of options for top coating your projects, and the choices can be very confusing. This video breaks top coat finishes into various categories, and explains advantages and disadvantages of individual finishes. It’ll help make choosing finish for your next project a lot easier.

    Watch Now >>
  • 3:50

    Making Your Own Walnut Stain

    Master woodworker George Vondriska shows you how to make your own homemade walnut stain for finishing your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Set Up a Spray Gun
    3:52

    How to Set Up a Spray Gun

    Master woodworker George Vondriska provides step-by-step instructions on how to set up a spray gun to optimize its performance for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Make Your Own Aerosol Spray
    2:13

    How to Make Your Own Aerosol Spray

    Spraying a topcoat is a great method for applying a finish. But what about those times when you just need to touch up an area or spray a small part? Loading your spray gun is probably not a great solution. George Vondriska shows you a unique way to make your own aerosol spray delivery tool…

    Watch Now >>
  • How to Clean a Spray Gun
    5:58

    How to Clean a Spray Gun

    As with most shop tools, cleaning your spray gun properly will result in a successful, hassle-free wood crafts project experience. Master woodworker George Vondriska takes you step-by-step through the process of cleaning your spray gun after each use. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Avoid Spray Gun Bounce-Back
    2:42

    How to Avoid Spray Gun Bounce-Back

    The downside to most standard spray guns is that the bounce-back can be significant, sending excess finish airborne in your shop. Let George Vondriska show you why HVLP systems are the best way for the average woodworker to avoid spray gun bounce-back. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Apply Flocking
    4:30

    How to Apply Flocking

    Master woodworker George Vondriska provides tips on how to apply flocking to wood for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Finish Application Tips
    8:01

    Finish Application Tips

    Master woodworker George Vondriska provides tips on how to expertly apply finish to your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>