• How to Calibrate a Table Saw Fence
    2:45

    Bruce Kieffer is a professional furniture maker who always wants his tools to be as accurate as possible. In this clip, he demonstrates his woodworking technique for calibrating his table saw fence so you can make dead-on cuts every time. A WoodWorker Guild of America (WWGOA) original video.

    Watch Now >>
  • Double Taper Using a Taper Jig
    5:00

    Side panels on stools look great with a taper in the front and back, but cutting both tapers so they are the same profile can be frustrating. George Vondriska shows you how to build a taper jig for cutting a double taper on the table saw. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Cutting a Log on a Band Saw
    3:54

    George Vondriska provides tips on how to use your band saw as a sawmill. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Coiling a Band Saw Blade
    1:48

    George Vondriska demonstrates how to properly coil and store a large band saw blade for DIY woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Cleaning a Rusty Table
    8:41

    George Vondriska demonstrates the best way to remove rust from a cast-iron tool table. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Circle Jig on the Bandsaw
    6:13

    George Vondriska shows his shop-made circle jig solution for cutting a perfect circle on a band saw. A WoodWorkers Guild of America original video.

    Watch Now >>
  • Band Saw Resawing
    4:08

    George Vondriska provides instruction on how to select the proper side of the wood to cut a veneer, and which band saw blade will help you cut a great piece of veneer for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video. Band saw blade provided by PS Wood Machines. For more information,

    Read more »

    Watch Now >>
  • Easier Clamping on a Band Saw Table
    4:33

    It can be tricky to clamp fences and jigs to the top of a cast iron band saw table because the webbing on the underside of the table gets in the way of your clamps. Fear not, George Vondriska teaches you a simple technique to create a flush surface on the bottom of your band

    Read more »

    Watch Now >>
  • Cutting Laminate on a Table Saw
    1:26

    Master woodworker George Vondriska demonstrates the best way to safely cut perfectly straight plastic laminate with your table saw. You’ll learn that all you need are a couple of scraps to make a handy foolproof woodworking jig.

    Watch Now >>