• Organic Stains
    4:34

    Organic Stains

    Nothing is simpler than making your own stains just using organic materials from your yard or kitchen. Master woodworker George Vondriska demonstrates the simple process that you can use to create organic stains for your next woodworking project.

    Watch Now >>
  • Making the Tail of Sliding Dovetail Joint
    4:54

    Making the Tail of Sliding Dovetail Joint

    Sliding dovetail joints are super strong. Master woodworker George Vondriska shows you how to set up and rout dovetails on a router table.

    Watch Now >>
  • Leveling Edge Banding With A Belt Sander
    2:36

    Leveling Edge Banding with a Belt Sander

    Plywood edgebanding is best applied slightly wide and then sanded flush using a belt sander. Woodworking expert Bruce Kieffer shows you how to do this type of belt sanding without sanding through the plywood veneer or gouging the panel.

    Watch Now >>
  • Laying Out Circular Rails
    5:30

    Laying Out Circular Rails

    Building the circular rails for a round table can be intimidating. Master woodworker George Vondriska breaks down the steps using a straightforward approach, and you might be surprised to see how stress-free you can make this rather difficult woodworking process.

    Watch Now >>
  • Know Your Hand Planes
    2:54

    Know Your Hand Planes

    There are many different styles and shapes of hand planes, so it is important to know how to optimize your use of each type when completing your woodworking projects. Master woodworker George Vondriska discusses when to use a scrub plane, smooth plane, and block plane.

    Watch Now >>
  • Concentric Variable Spaced Dovetails
    3:40

    Concentric Variable Spaced Dovetails

    Dovetails are widely viewed in the woodworking world as a mark of premium craftsmanship. Cutting them with variable spacing creates a strong visual appeal, and the appearance of a hand-cut approach. Master woodworker George Vondriska demonstrates how to use a router, dovetail jig and guide block to make concentric variable spaced dovetail joints without the…

    Watch Now >>
  • Climb Cutting on a Dovetail Jig
    3:23

    Climb Cutting on a Dovetail Jig

    Router bit tearout is a nasty problem when you’re cutting dovetails. So master woodworker George Vondriska shows you how to avoid this devastating problem when completing your woodworking projects by using a technique on a dovetail jig called climb cutting.

    Watch Now >>
  • Clamping Biscuits
    3:36

    Clamping Biscuits

    It’s time to drop your standard woodworking clamps and check out these clamping biscuits. Master woodworker George Vondriska teaches you how they work and how they can be an easy solution in your woodworking shop for some of those more difficult-to-clamp joints.

    Watch Now >>
  • Biscuit Joiner on a Router
    4:05

    Biscuit Joiner on a Router

    Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.

    Watch Now >>