• 9:25

    How to Make Face Frames

    If you’re interested in building cabinets, you’ll want to learn how to make face frames. If you plan to make a lot of cabinets, such as a set for your kitchen, then efficiency becomes very important. Learning how to make face frames is not hard, but like anything, there are some tips that can help…

    Watch Now >>
  • 3:07

    Quick Tip: How to Change Planer Blades

    Knife changes aren’t too bad on benchtop planers, except for the eleventy billion bolts you have to take out of each knife. Times two or three to get ALL the knives changed. Wanna learn how to change planer blades faster, and easier? Eliminate hand work Most benchtop planers come with some kind of wrench that…

    Watch Now >>
  • 10:05

    Kreg Adaptive Cutting System Review

    Track saws and cutting systems that use them are quite the rage. And it makes sense. What a great way to get large pieces cut down to more manageable sizes, straight line rip stock, cut funky angles, and more. But here’s my question: can you use a track saw and cutting system to produce all…

    Watch Now >>
  • 5:30

    Gluing Veneer: No Paper Back

    A special cut of veneer can turn a project from ordinary to extraordinary, but you get the cool look that you are after, you will have to learn how to attach veneer to a substrate. Many woodworkers are intimidating by the idea of gluing veneer themselves. They have concerns that special tools and glues will…

    Watch Now >>
  • 4:19

    Finishing 2 Faces Made Easy

    When it comes to finishing projects, there can be challenges. Let’s do everything we can to eliminate challenges, and make finishing as simple as possible. Here’s a trick that will help your finishing move along a little faster; finishing both faces of a project in one go. I have to say that for a lot…

    Watch Now >>
  • 4:46

    How to Do an Easy Miter Glue Up

    If you want to know how to make strong mitered corners, it’s partially about cutting technique, but even more about assembly technique. A miter glue up can be a daunting task, even to an expert woodworker. The joints can seem to have a mind of their own when you’re doing a miter glue up, when…

    Watch Now >>
  • 3:11

    How to Save Your Wood Shavings

    Most of the time, woodworkers are looking for ways to get rid of the shavings and sawdust from their projects. But every once in a while, when there’s something special about the shavings, you may want to collect and save the sawdust. Here’s a great trick that makes it super simple to grab that cool…

    Watch Now >>
  • 3:31

    Choosing a Router Base: Flat vs Round Side

    There are lots of aspects of woodworking that are intuitive. Some, not so much. This is an example of not so much. Routers and Fences One way to guide a router through a cut is to attach a fence to the router, allowing the fence to ride along the edge of your work. An alternative…

    Watch Now >>
  • 3:17

    Making Inset Drawer Fronts: How to Find the Perfect Fit

    Building a dresser is a great project to take on, with lots of skills to master. One of the aspects of building a dresser that many woodworkers find intimidating is to build inset drawer fronts, which can be a distinctive accent to a dresser or cabinet project. There are a couple reasons that inset drawer…

    Watch Now >>