• Gluing Countertop Material for Turning
    5:08

    Gluing Countertop Material for Turning

    Solid countertop material makes for excellent material for turning bowls and other projects on a lathe, but it’s important that you be sure to properly glue multiple layers of the material together before you start turning. The key is using the right glue. George Vondriska teaches you how to use CA glue from Titebond to…

    Watch Now >>
  • Using Cauls and Playing Cards for Even Clamp Pressure
    5:15

    Using Cauls and Playing Cards for Even Clamp Pressure

    George Vondriska teaches you a neat little trick for creating tighter biscuit joints on your shelving. After inserting the biscuits into their slots and filling them with glue, he likes to put two playing cards between the case side of a shelf that will be clamped and a flat caul. This will allow the glue…

    Watch Now >>
  • Add a Curved Accent Stripe to Your Woodworking Project
    5:03

    Add a Curved Accent Stripe to Your Woodworking Project

    George Vondriska teaches you how to add a touch of class to the handle of an ice cream paddle or any other lathe-turned kitchen utensil with a curved accent stripe. He cuts a blank of rosewood into two parts on the bandsaw with a gradual curved line, and then demonstrates the proper way to clean…

    Watch Now >>
  • How to Remove Glue Squeeze-Out
    0:55

    How to Remove Glue Squeeze-Out

    Dave Munkittrick teaches you a simple woodworking technique how to remove glue squeeze-out from your projects. He prefers to rub down the joint with a wet sponge and then dry it off with a rag, which will nicely clean up the excess without harming the bond.

    Watch Now >>
  • Magnetic Clamp Pads
    1:03

    Magnetic Clamp Pads

    Dave Munkittrick teaches you how to protect the wood that you are clamping from being scarred by the sharp metal of woodworking clamps. He likes to create magnetic clamp pads for wood from bass wood that you can easily stick on and pull off of clamps to keep your projects from being flawed with dents…

    Watch Now >>
  • Using Clamping Cauls
    2:13

    Using Clamping Cauls

    Dave Munkittrick talks about why he likes to use refashioned 2x4s as clamping cauls for his woodworking projects. With a pair of cauls, you can apply pressure evenly across whatever wooden surface you are clamping, including edge banding, and avoid ending up with marks or dents in either side of your piece.

    Watch Now >>
  • Applying Thin Edge Banding
    1:57

    Applying Thin Edge Banding

    Dave Munkittrick teaches you a quick woodworking technique for applying thin plywood edge banding to a piece of hardwood that will be used as shelving for a faceless cabinet. All you’ll need is a thin line of glue, a few evenly spaced micro-pins and a pair of clamps with cauls to achieve uniform pressure.

    Watch Now >>
  • Repairing a Finger Board on a Violin
    3:16

    Repairing a Finger Board on a Violin

    George Vondriska demonstrates a simple way to repair a broken violin finger board using Liquid Hide Glue from Titebond. After you clean off the original glue from both the fingerboard and the neck, you can use an even coat of the hide glue and a few clamps to bond the pieces back together. Liquid Hide…

    Watch Now >>
  • Using Wooden Wedges to Clamp Edge Banding
    4:02

    Using Wooden Wedges to Clamp Edge Banding

    You may have found that using clamps to apply pressure to a piece with glued-on edge banding can cause the surfaces to not stick uniformly. So George Vondriska teaches you how to utilize clamps and wooden wedges to help hold the edge banding securely against your woodworking project while the glue dries.

    Watch Now >>