• Random Orbit Sander Buying Advice

    George Vondriska recommends adding a Random Orbit Sander from Bosch to your shop to help rid of any unwanted scratch marks or swirls when sanding your latest woodworking project. Typical round or oval-shaped rotary heads spin in one pattern, so you either end up with uneven levels in the wood or a hand cramp from…

    Watch Now >>
  • Woodmaster 718 Changeover Process

    Paul Mayer demonstrates how to change over the functions on a Woodmaster 718 by switching out his sanding drum for a spiral cutter head. He walks you through the step-by-step procedure, a relatively simple process that should take you no more than ten minutes to properly complete. If you love the Woodmaster 718 as much…

    Watch Now >>
  • Understanding Drill Settings and Numbers

    Are you confused by all the numbers on your cordless drill? Using the correct drill settings on your drill will make it easier to use. George Vondriska explains in detail what the numbers on a drill represent and what number to set your drill to depending on how you’re using the drill.

    Watch Now >>
  • Woodworking Tool Maintenance Using an Inspection Camera

    Tool maintenance and diagnostics are both important aspects of keeping your woodworking tools working and your shop safe. George Vondriska shows you how to use the Bosch PS90 Inspection Camera to accurately inspect your tools. Use an inspection camera to see into tight spaces and help diagnose problems with your tools. PS90 Inspection Camera provided…

    Watch Now >>
  • Finish Nailer Buying Advice

    A finish nailer can make your woodworking projects easier while making you a more efficient woodworker. Using the Bosch 16 ga. Straight Finish Nailer, George Vondriska explains what you should look for when buying a finish nailer. A WoodWorkers Guild of America (WWGOA) original video. 16 ga. Straight Finish Nailer provided by Bosch. For more…

    Watch Now >>
  • Router Bit Technology

    George Vondriska demonstrates technology of router bits. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Whats the Deal with the Pin in the Band Saw Table?

    When you change the blade on your bandsaw, you need to remove that little pin in the slot of the band saw table. Don’t throw it away! George Vondriska teaches you why.

    Watch Now >>
  • Whats the Deal with a Band Saw Foot Break?

    A foot brake on a bandsaw is kind of like a foot break on a car. It’s used to stop things fast! George Vondriska shows you how a band saw foot break operates.

    Watch Now >>
  • Vertical Panel Raiser

    Thinking of buying a vertical panel raiser for your router table? George Vondriska demonstrates how to safely use the bit and discusses some of the pros and cons of the vertical panel router bits and the classic horizontal panel bits.

    Watch Now >>