We had a huge audience for the March LIVE Q&A. Here’s what we covered:
1:05 April LIVE streams. There will be an extra one or two
1:30 Spring Sawdust Sweepstakes
2:20 What wood is this?
3:20 Wall clamp rack
4:15 Setting up a miter saw
8:45 Measurements for half lap picture frame
10:30 Water cooled vs air cooled spindles for CNC
12:20 What does George do with his shavings and sawdust?
13:35 Crosscut sled on tablesaw. Where should the stops go?
14:40 Miter saw and planer recommendations
16:30 Organizing shop tools in a garage
17:50 Moving shop tools across country
19:25 Oil based spar varnish vs water based spar varnish
20:20 Vertical router jig?
21:16 Jointer recommendations
21:50 Setting depth of iron on a hand plane
22:35 Paste wax over Armor Seal?
23:05 Name that wood
23:50 Shop-made clamps Groz
25:13 Live edge outdoor sign. Bark….
26:10 Finish for shop-made cabinets
26:50 6” jointer ok?
27:28 Resin classes with Jess Crow
29:12 Squaring a drill press table.
32:00 Shop lay out
33:45 SketchUp class. Download SketchUp Make 2017 here.
35:00 Router table vertical jig for lock miters. See a lock miter cut here.
35:50 Stain, finish and glue still usable?
37:25 Flat top grind saw blade?
38:12 Meet the Makers in June? www.vondriskawoodworks.com
39:15 Shelf life of yellow glue
39:50 Cheap way to start woodworking?
40:45 CNC buying advice
41:40 Adding T-tracks to a bench
42:45 Portable CNC vs benchtop CNC
44:00 Doing shop math – Fractional calculator
46:10 Cord reels. What gauge? 12 ga cord reel
46:35 Starter tools
49:22 Euro hinges leave a gap
50:49 Lathe turning wood with cracks in it?
52:22 Is it worth milling ash?
52:40 Leather vs wood mallet
53:20 Jointing edges without a jointer
54:00 Radial arm saw?
55:10 Maker spots in the Twin Cities
56:00 14” bandsaw?
56:25 Benchtop router table recommendation
56:50 Height of a lathe
57:40 Bench chisel recommendation
59:15 Spring Sawdust Sweepstakes