When you use sheet goods in your shop how do you make sure you’re getting the most you can out of each sheet? It’s relatively easy on small projects, but when you do a large project that uses a lot of sheets, you can burn up a lot of unnecessary material if you haven’t done a good job optimizing. Did you know you can let woodworking software do this for you? Check out just how easy your computer can make this job.
You Might Also Enjoy
-
4:05Biscuit Joiner on a Router
Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.
Watch Now >> -
2:14Build Your Own Adjustable Woodworking Bench
Have you ever wanted the ability to raise and lower the benches in your woodworking shop while working on various projects? George Vondriska shows you how valuable and easy it is to have an adjustable bench in your shop.
Watch Now >> -
1:42Mounting Router Bits
It is possible to mount a router bit incorrectly in your router collet, and that can spell disaster for your woodworking project. George Vondriska shows you how to properly insert and clamp router bits into your router.
Watch Now >> -
2:282 Bit Dovetail
When working on your woodworking project, have you ever wondered why most dovetail jigs are a two-bit operation? Woodworking expert George Vondriska explains how through-pins and tails are cut on a jig, and when to use each of the two cutters required for the process. He also discusses why it’s so important to match the…
Watch Now >>
