Want to achieve perfect mortise and tenon joinery every time? Master woodworker George Vondriska provides step-by-step instruction on how to use an FMT (Frame Mortise and Tenon) jig to cut mortise and tenon joinery for your woodworking projects.
You Might Also Enjoy
-
2:55Choosing a Brush for Your Top Coat
You’ve spent a lot of time on your project getting it ready to finish, so why not finish it right? If you’re going to apply four layers of stains or top coat with a brush, it’s important to use the proper brush for the job. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
7:53Cabinet Door Assembly
When creating a cabinet door, it is critical to keep the wood flat and square. George Vondriska provides practical tips on how to assemble door panels using a parallel jaw clamp. A WoodWorkers Guild of America (WWGOA) original video. Steel Bar Clamps provided by Jorgensen. For more information, visit www.ponytools.com
Watch Now >> -
2:58Bowl Turning Paper Joints
George Vondriska teaches you how to use a paper joint for your bowl turning. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
2:10Build a Cribbage Board
George Vondriska and A.J. Moses discuss the process for making a cribbage board from scrap wood in your woodworking shop. These cribbage board plans are included in the WoodWorkers Guild of America (WWGOA) original video. Read the article Make a Cribbage Board with Peg Storage to get step-by-step instructions and a cut list for this…
Watch Now >>
Have the FMT machine, works fine for both mortises and tenons, however it will not cut any M or T wider than 1/2″. If you find a way to break this limit Please let me know Thanks for the video presentation.
David Kennedy