Tearout-Free Crosscuts on Plywood
Bruce KiefferOne of the hazards of crosscutting plywood on the table saw is the unsightly tearout you get where the blade exits the material. Bruce Kieffer demonstrates a great woodworking technique that will give you smooth, tearout-free crosscuts. A WoodWorkers Guild of America (WWGOA) original video.
Share tips, start a discussion or ask one of our experts or other students a question.
Already a member? Sign in
4 Responses to “Tearout-Free Crosscuts on Plywood”
Explore videos by Bruce Kieffer
You may be interested in
Premium Membership
Unlock exclusive member content from our industry experts.
- 24/7 Access to Premium Woodworking Videos, Projects, and Tips
- Step-by-Step Instructional Demos, Plans, and Tutorials
- 50% Off Video Downloads Purchased in the Woodworkers Guild of America Shop
- 2 Printable Woodworking Plans
Unlock exclusive member content from our industry experts.
- 24/7 Access to Premium Woodworking Videos, Projects, and Tips
- Step-by-Step Instructional Demos, Plans, and Tutorials
- 50% Off Video Downloads Purchased in the Woodworkers Guild of America Shop
- 2 Full-Length Video Downloads to Watch Offline
- 2 Printable Woodworking Plans
Gold Membership
$370 Value
Get everything included in Premium plus exclusive Gold Membership benefits.
- 24/7 Access to Premium Woodworking Videos, Projects, and Tips
- Step-by-Step Instructional Demos, Plans, and Tutorials
- 8 Full-Length Video Downloads to Watch Offline
- 3 Full-Length Woodworking Classes to Keep for Life
- 7 Printable Woodworking Plans
- Discounts on Purchase-to-Own Content in the Woodworkers Guild of America Shop
- Access to Ask the Expert Program
- Exclusive GOLD LIVE Streaming Events
It is not always possible but with the example presented, what about raising the blade at 70% of the wood thickness and flip the piece of wood on the second pass? That way you don't have to move your setup at all. This is what I was expecting while watching the video.
Good tip need to try it have struggled with that issue MANY times have tried scoring with a utility knife and tapping the cut line with different types of tape which worked OK???????? Looking forward to trying this one.
Sounds like a good suggestion. However, you didn't mention what blade was in your saw during the shooting of the video.
I will have to try it. Now, if it is important, I usually make the cut about a 1/32" wider, and then do a skim cut to final dimension, woks quite well. One setup is better than two.