George Vondriska

Kitchen Tongs

George Vondriska
Sign in
Duration:   19  mins

Add kitchen tongs to your list of simple woodworking projects. George Vondriska walks you step-by-step through the planning and building process for making a pair of kitchen tongs that you can give as a gift for a friend or loved one or use in your own home. George teaches you the simple woodworking tips and techniques you’ll need to cut the angle and width of the spacer and epoxy, sand, shape and finish the tongs.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

9 Responses to “Kitchen Tongs”

  1. Carolyn Payne

    Spacers were made by crosscutting 1 1/4" slices off an 8" wide board. The wide board was used to get as many spacers as possible safely as each 8" slice then has to be cut into 1 1/8" sections with a miter saw. Since I do not have any wide boards, I was wondering if it matters structurally if I rip the 1 1/4" slice off the board longnitudally instead of crosscutting? This will give me one long piece to make the short spacers, instead of getting several short pieces from crosscutting the board. Thank you.

  2. Jonathan

    Great project.

  3. PAUL

    Why use epoxy instead of wood glue. I am horrible at mixing epoxy and my tongs fell apart after about 4 uses. Can I use wood glue instead, or is there a reason not to use it.

  4. Bill

    You said you used 3/4" thickness for the spacers but you never say how long they should be. I guess I could figure it out if I knew how thick your stop block is since you say you measure 1 1/4" from the fence. From the looks of the picture it looks like the length is bigger than the width. So is it 1" for the length of the spacer?

  5. Samuel Marrero

    Nice for gifts. Great idea. Question, How you get the tongs. Are they pre cut or you cut them from a piece of wood?

  6. jason

    What did you use on the belt sander to clean in between sanding?

  7. Ronald Cukrowicz

    Can you tell me what the material is that is used to clean the sander?

  8. Linda McAdams

    Really nice tongs

  9. Linda McAdams

    Nice Project

Get exclusive premium content! Sign up for a membership now!