Using Your Smartphone as a Digital Angle Gauge

Duration: 5:00

Setting angles on your tools can be a little tricky, and getting the angles just right is very important. If you’re doing something like stave construction, or any multi-sided item, being off just a few degrees on the set up can lead to disastrous results. But if you own a smart phone, the answer for accurately setting angles is at your fingertips.

Start with an App

Your phone on its own won’t be much help. You need to add an app that’s designed for reading angles. The app we’re using on an iPhone in this video is called Rotating Sphere Clinometer. If that specific app isn’t available for your device, there are lots of other angle reading apps out there. Get one for your phone.

Build a Jig

We need a very simple jig. The jig acts as a fixture that will hold your phone, and it also needs to have rare earth magnets on it that will secure the jig to your saw table and saw blade. Each jig will be a little different, depending on your phone, but some tips for making the jig are provided in the video.

Using Your Gauge

Once you’ve got the app and have built the jig, using your setup is easy. Zero the angle gauge to your table, then place the jig on your saw blade (with the saw unplugged) to determine the angle of the blade. Easy peezy.

Your Phone in Your Shop

There are a handful of helpful ways you can use your phone in the shop. Woodworking apps for your iPhone can definitely make your woodworking life easier.

We Love Giving you Tips

Even the most simple shop tips can make the difference in making your shop time more pleasant. Check out more helpful shop tips to see where else out tips can make your life easier.

Reply to Customer Service
  • (will not be published)

2 Responses to “Using Your Smartphone as a Digital Angle Gauge”
    • Customer Service
      Customer Service

      Hello David,

      Here is what the experts had to say:

      Sorry about that. Apps come and go with such frequency that your best bet is to search for an angle gauge, find one with a good rating that is available for free or low cost and give it a try.

      Best of luck,

      Paul
      Woodworkers Guild of America

      Reply