Master woodworker George Vondriska provides step-by-step instruction on how to use an FMT (Frame Mortise and Tenon) jig to cut mortise and tenon joinery for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.
You Might Also Enjoy
-
2:55Choosing a Brush for Your Top Coat
You’ve spent a lot of time on your project getting it ready to finish, so why not finish it right? If you’re going to apply four layers of stains or top coat with a brush, it’s important to use the proper brush for the job. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
2:05Comparing Aerosol Can Nozzles
When selecting an aerosol can to finish your woodworking project, pay special attention to the nozzle on the can. Many nozzles give you a choice for the spray pattern you’ll have, and George Vondriska shows why it’s important. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
6:00Captive Ring Out of Spindle Turning
There aren’t many woodworking techniques that will draw more ooh’s and aah’s from your woodworking buddies than a captive ring turned on a spindle. George Vondriska demonstrates the mysterious technique in this clip. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
2:04Board Foot Measure
George Vondriska provides tips on how to formulate the board foot measure of hardwood so that you can better assess how much wood you’ll need for your woodworking project and better communicate with the salesman when you go to purchase your wood. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >>
Free video