Charlie Kocourek

Flattening Large Wood Slabs with a Router

Charlie Kocourek
Sign in
Duration:   6  mins

Slabs of wood make excellent tables; the challenge lies in flatting them on the surface. In most cases, cool slabs will be too large for a planer or sander to handle; end grain slabs, on the other hand, will not be suitable for a planer. Fortunately, there is an easy way to flatten any oversized board using a shop-made jig and a router, and I’ll show you how.

For step-by-step instructions, check out our blog post: Flattening Large Wood Slabs with a Shop-made Jig and a Router

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

12 Responses to “Flattening Large Wood Slabs with a Router”

  1. David Colella

    Such a simple cheap alternative to expensive commercially made sleds. Well done.

  2. Kevin W Baker

    It is imperitive to wear dust mask when doing this operation.

  3. Carlos Alvarado

    That was a very good way of doing the flatting of a round of wood. My problem with that is that I do not use power tools only hand tools. How would you all suggest that I do the flatting using say a hand plane would you suggest that I go in a circle so as not to gouge the wood. I understand that you are most power tool advocates and only use hand tools on occasions, well I am the other way around and only use power tools occasionally. So, how would you suggest I tackle the problem.

  4. Bob

    How is the "gap" between the level and the work surface reduced by shimming the bottom of the workpiece?

  5. Martin Schwartz

    I would use a chain saw to level the piece and then sand it smooth. I would use an Festool MFT table to secure the piece to the table and not require the elaborate plywood jig to secure to the table, which seems far too nice to mess up. All in all, I suspect doing it my way would save a lot of time and plywood.

  6. GARY

    This is the best info on a router sled i have seen so far. The router bit and speed info was excellent.

  7. Jerame

    Great idea. I wonder if a small window (cut out a square and cover with plexiglass) on each side of the router would give you a better view of that has been cut and what remains?? I also see this being useful on more than a cookie. What about a rough-cut mantel piece from a log?

  8. Howard Ek

    Nice! I plan to build a sled!

  9. Joe

    Great video!

  10. Hossein

    I was really interested to watch how the operation can be carried on, but video could not opened.

Get exclusive premium content! Sign up for a membership now!