George Vondriska teaches you how to format perfectly framed curves at the bottoms of your DIY dresser and cabinet. He gives you the woodworking dimensions you’ll need to lay out and make the cuts for a smooth, symmetrical curve.
-
5:41
Cutting Plugs and Using Plug Cutters
Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.
Watch Now >> -
6:36
Bridge Over Broken Guitar
Is the bridge of your guitar separating from the guitar top? You can save big bucks by making the repair yourself. You probably already have all the woodworking tools you need in your shop to fix the broken guitar, and if you follow master woodworker George Vondriska’s step-by-step directions in this video, you’ll gain all…
Watch Now >> -
3:36
Clamping Biscuits
It’s time to drop your standard woodworking clamps and check out these clamping biscuits. Master woodworker George Vondriska teaches you how they work and how they can be an easy solution in your woodworking shop for some of those more difficult-to-clamp joints.
Watch Now >> -
4:05
Biscuit Joiner on a Router
Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.
Watch Now >>