George Vondriska

CNC 3D Machine Carving

George Vondriska
Sign in
Duration:   4  mins

A wide array of amazing 3D clipart is available. 3D clipart, and the resulting carvings, will add a unique touch to your woodworking projects. If you don’t like sanding (and who does?) make sure you do these carvings with the right bits to ensure the best cut quality.

3D clipart

If you don’t have the artwork you’re looking for in your design software check out Design and Make. A huge assortment of clipart is available there. The clipart used in this video is called Cantering Arabian.

The bits

3D carving is commonly done with two toolpaths, one for roughing and one for finishing. The roughing toolpath removes the bulk of the material, leaving the workpiece looking a little like a tiered cake. The finishing toolpath removes the rest of the waste, leaving the completed image.

The diameter of bit used for the roughing pass varies depending on the size of the carving. Use larger bits for large carvings. A ¼” upcut spiral was used for the roughing toolpath on this project. Similarly, choose the ball nose bit for the finishing toolpath based on the size of the clipart. A ⅛” tapered ball nose bit was used for the finishing pass with a 10% stepover.

The results

With the toolpath correctly set up and the right bits chosen for the project, you’ll find that you have very little sanding to do on the completed carving. The best results come from doing the carving in close grained woods like hard maple, cherry or walnut.

More info

For more information on the router bits you can use for your CNC work check out www.bitsbits.com.

WWGOA has a lot of content that will help you with your CNC router work. Check out the large variety of CNC videos that are available.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

2 Responses to “CNC 3D Machine Carving”

  1. Nelson Augustine

    Sir. Where can I get a tool path file done from and what would be the charges

  2. Clifford

    What are the optimal feeds and speeds.. I am trying to carve a special forces emblem and I get tear out on the arrows or text details.

Get exclusive premium content! Sign up for a membership now!