George Vondriska

Burl Wood Bowl Blanks - Where Do You Start?

George Vondriska
Sign in
Duration:   5  mins

One of the best parts of bowl turning is finding chunks of unusual wood that you can turn into amazing bowls. In this case, George was given a huge piece of red oak burl. In this video he explores the burl wood, and walks you through how he changes the huge chunk of wood into blanks for burl bowls. It’s all about processing the burl and converting it to what you need for your projects.

Green wood, or dry?

It’s best to start processing burls and logs for bowl blanks as quickly as possible. You want the wood green, wet, when you cut it up. If it dries as a log or burl there’s a good chance it will start to crack. Once you’ve got your green wood bowl blanks, you can use the trick George shows to keep them wet.

Making it easy

One of the easiest ways to get started on large pieces like this burl wood is by using an electric chain saw. Since it’s electric, it can be used in the shop with no worries about fumes. An electric chainsaw makes short work of cutting large pieces down to manageable size.

Bowl turning is a blast!

Turning bowls can be a very rewarding woodworking experience. An aspect of it that is very cool is the relatively short turn around from start to finish. Depending on the size of the bowl, you may be able to complete a bowl turning project in just a few hours. WoodWorkers Guild of America has lots of resources available to you that will help you master bowl turning.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

9 Responses to “Burl Wood Bowl Blanks - Where Do You Start?”

  1. Robert Detz

    Really ... with all the clamps and being a wood shop,, you have a young lady hold the burl,, I am flabbergasted,, her father must have given you a black eye for that lame move,, Kick back and on a makeshift table,, could have screwed 2x4 or something to a more secure table, I am not impressed

  2. Alec

    How would you get these on the lathe as most of the sides exposed by the chain saw cuts are end grain? Having trouble getting my pieces to stay on the lathe due to going into end grain.

  3. RICHARD

    The next steps on this burl would be a great video. How do you prepare a surface for a faceplate?

  4. Dan Davidson

    I understand the intent to keep the wood moist in order to prevent cracking and to promote spalting. As someone who is a bit green himself I'm quite curious as to when and how you let (or cause) it to dry without cracking.

  5. Alec

    I have two large birch burls and I'm trying to figure out a way to get it round to go on the lathe. I have a chainsaw a bandsaw with a 4 inch height capacity and a reciprocating saw. Both burls are fairly symmetrical, I have seen people mount them on the lathe and round them on the lathe after cutting them to size like in the video. What are your opinions on this technique is it safe? What are some safety considerations that you have to be aware of when using this technique. Other than standard safety technique.

  6. Carl G

    <strong>Ticket 21884 Do you use bar oil when you use the electric chain saw inside? I have an electric saw but it throws off enough oil I wouldn't want to use it inside.

  7. Scott Smith

    Won’t wrapping a wet piece of wood in plastic cause a huge growth of mold, ruining your burl? Why not just paint on a sealer instead?

  8. Jerry

    Boy!!! This is a cliff hanger when do we get next chapter? Jerry

  9. Ralph oppermann

    Be careful having a partner hold your work with a chain saw. Kick back is a real thing.... I personally know of a fatality from this practice.

Get exclusive premium content! Sign up for a membership now!