Mitering the corners on banding that’s being applied to all four edges of a table top can be extremely frustrating. The length of each piece has to be perfect, and each angle needs to be just right. This process calls for a methodical approach, and Charlie Kocourek has that technique nailed down. Follow his recipe, and the banding on each of your projects will be dead on. For a more detailed look at this process, check out Charlie’s related article on the topic.
Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.Watch Now >>
George Vondriska teaches you a great way to refurbish the push pads you use in your workshop. Instead of just tossing your old push pads out, George recommends cutting off the rubber padding from the bottom of the pad, and screwing the plastic handle to a piece of scrap wood, which you can turn intoWatch Now >>
Router bit tearout is a nasty problem when you’re cutting dovetails. So master woodworker George Vondriska shows you how to avoid this devastating problem when completing your woodworking projects by using a technique on a dovetail jig called climb cutting.Watch Now >>