Comments on: How to Make an iPad, iPhone, Tablet, or Smartphone Stand

By: Muruganandam

Muruganandam — Fri, 09 Dec 2022 07:34:47 +0000

In reply to Gordon Yerdon. Sir im finicing corpenter15 Years. Experience. Im go ti abudhbi 3manths working

By: Customer Service

Customer Service — Sat, 12 Nov 2022 19:09:33 +0000

In reply to Rich. The blocks are the little pieces that are glued into place in the center of the dado to hold the leg into position. You mill the dado all the way through, then glue the block into position. Paul

By: Paul Mayer

Paul Mayer — Sat, 12 Nov 2022 16:16:05 +0000

In reply to Judy. The blocks are the little pieces that are glued into place in the center of the dado to hold the leg into position. You mill the dado all the way through, then glue the block into position.

By: Rich

Rich — Fri, 11 Nov 2022 18:40:31 +0000

I second Judy’s comment about: Step C talks about gluing blocks. What blocks? They are not in the diagram or mentioned anywhere else. Why do you use a bandsaw to separate the leg and base? Are you concerned about tearout?

By: aaron

aaron — Tue, 11 Oct 2022 19:25:59 +0000

cool

By: Jim

Jim — Tue, 30 Aug 2022 22:17:59 +0000

I need to use my scrap this is one I can use

By: 온라인바카라

온라인바카라 — Thu, 25 Mar 2021 06:14:15 +0000

I learned a lot and gained more knowledge.I was seeking this certain information for a long time..강원랜드카지노

By: Customer Service

Customer Service — Tue, 22 Dec 2020 15:39:39 +0000

In reply to Peters Gregory.

Hello Gregory,

Thank you for your patience while I reached out to the experts, here is the reply:

Sorry for the confusion. The piece should be cut to 5″.

Paul
Woodworkers Guild of America

By: Peters Gregory

Peters Gregory — Sun, 20 Dec 2020 02:21:25 +0000

The instruction says to start with a 5-1/4” piece for the platform and leg but both of those pieces are only 5” wide in the cut list and the diagram. Is there a reason for this difference?

By: Customer Service

Customer Service — Wed, 16 Dec 2020 20:33:08 +0000

In reply to Bob L.

Hello Bob,

Thank you for being patient while I reached out to the experts, here is the reply:

I’m not aware of problems that could be caused by a small magnet like this, but if you are concerned, perhaps consider this plan as it uses no magnets: https://www.wwgoa.com/article/wooden-phone-amplifier-charging-station/

Paul
Woodworkers Guild of America