Comments on: Box Joint Wood Grill Scraper

By: Customer Service

Customer Service — Thu, 09 Mar 2023 19:52:27 +0000

In reply to David Criss. The rabbet on this piece is probably an unnecessary step. It adds some mechanical strength to the joint, but the glue strength alone is likely sufficient for the stress that this joint will endure. So, I would consider it to be optional. Paul

By: David Criss

David Criss — Thu, 09 Mar 2023 01:04:16 +0000

The rabbet the body section could use some clarification.

By: Customer Service

Customer Service — Wed, 05 Feb 2020 14:07:18 +0000

In reply to Garry Meek.

Hey Garry,

This project is currently not available as a downloadable plan, but you can get the dimensions and step-by-step instructions by reading along and watching the video!

If you have any questions or concerns, please chat, email or call us at 1-855-253-0822.

Happy Woodworking!

Madeline
Woodworkers Guild of America Video Membership

By: Garry Meek

Garry Meek — Tue, 04 Feb 2020 21:54:26 +0000

how do I download this plan?

By: rbiggs

rbiggs — Thu, 16 Jan 2020 04:55:25 +0000

I’ve built 5 of these, the first being a test and the other 4 being gifts (with the modifications found needed).
All 5 were built with scrap Ipe wood, it burns like brick so you don’t have to worry about it getting hot, and you can tap it, to you can bolt the handle on it from the top … no heat to the handle. Modifications: replace the scrap part with a softer wood (Ipe wouldn’t burn to conform to the grill); Make the base longer and the handle further to the bottom… equals more mass to do the scrape work and it reaches further; Add a bottle cap opener to the top above the handle :) … can’t let the cook get thirsty :)

By: Lúcio Mario Moreno

Lúcio Mario Moreno — Sun, 17 Jun 2018 22:34:00 +0000

Muito bom,gostei !!

By: MIKE

MIKE — Fri, 15 Jun 2018 10:55:55 +0000

THANKS AWESOME SHOW OF HOW TO MIKE.

By: Dale

Dale — Fri, 08 Jun 2018 21:38:27 +0000

I will be building this grill grate scraper. I have never been comfortable with a wire brush. I have found bristles on my plate, Thanks for this idea.I may customize this scraper by cutting a little groove in the scraper to fit the shape if my grill better.

By: Mike

Mike — Fri, 30 Dec 2016 02:22:06 +0000

This is a great project! I am a surgeon and once had to remove a portion of grill brush from a patient. It had migrated through the intestinal wall and was very near some vital structures.

By: Thom

Thom — Fri, 08 Jul 2016 13:21:24 +0000

I’m definitely going to build this for myself and family and friends. I was unfortunate to have these grill brush bristles get into our food long story short I had emergency surgery spent a week in the hospital not a fun time. So thank you so much for this idea and build.