Comments on: Ask WWGOA: Bandsaw Resaw Blade Size

By: Harold

Harold — Sat, 21 Aug 2021 13:57:46 +0000

Thanks for that info.

By: ANDY

ANDY — Sat, 04 Jul 2020 15:13:24 +0000

I have a blade like that but the finish and power draw is a big problem. Which tooth design is better, mine has teeth that flare out.

By: Customer Service

Customer Service — Wed, 17 Apr 2019 14:54:02 +0000

In reply to nweber44.

Hello. As long as it has enough resaw capacity, yes, you can. George’s bandsaw can definitely do it: https://www.amazon.com/gp/product/B0136MA54E/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&tag=vondriskawood-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B0136MA54E&linkId=0d9bec71da093296f3be0085a8f361a0

Thanks
Paul-Woodworkers Guild of America

By: nweber44

nweber44 — Tue, 16 Apr 2019 02:25:29 +0000

I would like to know if you can split a one by twelve on a fourteen in ban saw .I would like to know before I buy one

By: Customer Service

Customer Service — Mon, 18 Mar 2019 18:38:10 +0000

In reply to cringanj.

Hello. In response to your request, we have cancelled the auto renewal of your Annual Gold Membership. Your membership will remain active until:2/17/2020. If you have any questions, please contact our customer service team at 1-855-253-0822.
Thanks
Jean-WWGOA Video Membership

By: cringanj

cringanj — Mon, 18 Mar 2019 02:31:41 +0000

I would like to cancel my subscription how do I do this. Thank you

By: Customer Service

Customer Service — Fri, 23 Mar 2018 17:49:32 +0000

In reply to Duane.

Hi Duane. It depends on the thickness of the material. A good guideline for choosing a tooth count for cutting any material on a bandsaw is to choose a blade that will have at least 2.5 teeth in the material at all times. So, if you were cutting 1″ material, a 3 TPI blade would be sufficient, while 1/2″ material would require 6 TPI. The width of the blade is determined by the radius that you want to cut. If you are cutting tight curves then you’ll want a smaller blade, such as 1/8″ or 1/4″. For gentle curves and straight cuts, a 3/8″ or 1/2″ blade works well.
Thanks
Paul-WWGOA

By: Customer Service

Customer Service — Fri, 23 Mar 2018 17:47:46 +0000

In reply to hickshardwoods.

Hello. I would suggest either birch, poplar or maple. Whatever you can get in the best quality and price in your area. These will all be virtually equivalent since you are painting the cabinets.
Thanks
Paul-WWGOA

By: hickshardwoods

hickshardwoods — Fri, 23 Mar 2018 02:01:34 +0000

Kitchen Cabinets,
I am in the process of researching the materials used to build cabinet doors and drawer fronts. I am going to build the carcass with birch plywood and my question to the wwgoa community what is the good, better and best paint grade material used for the stile, rails and drawer fronts. Since I am the builder saving the cost of having it done, I’m wanting to use money saved for high end material and storage hardware.

By: Duane

Duane — Fri, 23 Mar 2018 01:41:08 +0000

Watched the recent video on cutting acrylic on the table saw. What about cutting acrylic on the bandsaw? Blade suggestions?