Power Tool Woodworking

Sort by:

  • How to Calibrate a Table Saw Fence

    How to Calibrate a Table Saw Fence

    Bruce Kieffer is a professional furniture maker who always wants his tools to be as accurate as possible. In this clip, he demonstrates his woodworking technique for calibrating his table saw fence so you can make dead-on cuts every time. A WoodWorker Guild of America (WWGOA) original video.

  • Double Taper Using a Taper Jig

    Double Taper Using a Taper Jig

    Side panels on stools look great with a taper in the front and back, but cutting both tapers so they are the same profile can be frustrating. George Vondriska shows you how to build a taper jig for cutting a double taper on the table saw. A WoodWorkers Guild of America (WWGOA) original video.

  • Cutting a Log on a Band Saw

    Cutting a Log on a Bandsaw

    George Vondriska provides tips on how to use your band saw as a sawmill. A WoodWorkers Guild of America (WWGOA) original video.

  • Coiling a Band Saw Blade

    Coiling a Bandsaw Blade

    George Vondriska demonstrates how to properly coil and store a large band saw blade for DIY woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

  • Cleaning a Rusty Table

    Cleaning a Rusty Table

    George Vondriska demonstrates the best way to remove rust from a cast-iron tool table. A WoodWorkers Guild of America (WWGOA) original video.

  • Circle Jig on the Bandsaw

    Circle Jig on the Bandsaw

    George Vondriska shows his shop-made circle jig solution for cutting a perfect circle on a band saw. A WoodWorkers Guild of America original video.

  • Plunge vs Fixed Based Routers

    Plunge vs. Fixed Based Routers

    George Vondriska demonstrates the difference between plunge and fixed based routers. A WoodWorkers Guild of America (WWGOA) original video. For more woodworking videos, please visit www.wwgoa.com!

  • Bandsaw Resawing

    George Vondriska provides instruction on how to select the proper side of the wood to cut a veneer, and which band saw blade will help you cut a great piece of veneer for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video. Band saw blade provided by PS Wood Machines. For more information,…

  • Belt Sander Tips

    Belt Sander Tips

    Master woodworker George Vondriska teaches you some helpful woodworking tips for successfully using the belt sander. A WoodWorkers Guild of America (WWGOA) original video.

  • Essential Handheld Router Techniques

    Essential Handheld Router Techniques

    The router is one of most versatile power tool in your shop and is a must have for any woodworker. Watch this woodworking video and learn a number of router techniques from our master woodworker, George Vondriska. George starts with buying advice, covering the various types and sizes of router – from tiny trim routers, to 3 plus horsepower behemoths, to battery powered routers. You’ll know what these routers are used for and how to pick the right one for your woodworking needs. Features such as variable speed, soft start, and fixed and plunge base designs, are covered.

    You’ll also learn about router bits, including insert tooling, bearings, and shank sizes. George also introduces the basics of using a router; mounting bits properly, setting depth of cut, securing work on the bench, starting your cut, feed direction and stopping your cut. The video describes more advanced techniques, such as inlay work, routing dadoes, flush trimming plugs, edge joining large boards, climb cuts, and cross cutting long panels.

    Finally, George covers router and bit maintenance, including sharpening a router bit.