Woodworking Joinery

Woodworking Joints and Joinery Videos

Looking for the perfect woodworking joints to complete your wood projects? Check out our woodworking joinery videos. We cover how to create them all from cutting dados to rub joints.

Sort by:

  • Cutting Tenons on the Band saw

    Cutting Tenons on the Bandsaw

    Mortise and tenon joinery is commonly used for tables, chairs, and a variety of other projects. Getting a uniform fit between the tenon and mortise is the key to solid joinery, and the band saw is great for making perfectly fitting tenons. Before making the tenons, cut the mortises, then cut the tenons to fit.…

  • DIY Drawers: Lock-Joint

    DIY Drawers: Lock-Joint

    In this DIY drawers video, get an introduction to lock-joints. Drawers take a lot of abuse. If you want to provide quality work, it’s best to assemble drawer corners with a joint that can stand up over time. Drawer lock joints provide a mechanical grab, almost a tongue and groove, between the drawer side and…

  • Jointing With a Handheld Router

    Jointing with a Handheld Router

    Projects often call for edge-to-edge joints on long boards, but long boards can be difficult to handle on a jointer. If you don’t get a good glue edge, you won’t have a good glue joint. An easier approach for jointing long stock is using a handheld router with a steel stud as a guide. I…

  • Cutting Dovetails on a Bandsaw

    Cutting Dovetails on a Bandsaw

    On a through dovetail, each part projects through the mating piece. This means the end grain on one piece shows through the face grain on the opposite piece. This style of dovetail can be done by cutting dovetails on the band saw. A dovetail slope of either 1:6 or 1:8 is commonly used to produce…

  • Using a Biscuit Joiner

    Using a Biscuit Joiner

    Biscuit joiners are great for when you want to securely fasten a butt joint on your woodworking projects. George Vondriska teaches you how to use the biscuit joiner to attach a shelf at a 90-degree angle to the face of another board. A WoodWorkers Guild of America (WWGOA) original video.

  • Mitering a Perfect Octagon

    Mitering a Perfect Octagon

    George Vondriska demonstrates the simple process of mitering a perfect octagon. A WoodWorkers Guild of America (WWGOA) original video. Incra Miter 1000HD provided by Incra. For more information, visit www.incra.com. More Videos provided by Incra: Tuning Up Your Miter Gauge

  • Making Mortises with a Plunge Router

    Making Mortises with a Plunge Router

    George Vondriska shows you how to set up and correctly position a plunge router on a woodworking project to cut the perfect mortise. A WoodWorkers Guild of America (WWGOA) original video.

  • How to Use a One Piece Tongue & Groove Bit

    How to Use a One-Piece Tongue and Groove Bit

    George Vondriska provides instruction on how to set up a router table to use a one piece tongue & groove bit for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

  • Dovetail Jig Buying Advice

    Dovetail Jig Buying Advice

    Dovetail joints are a beautiful addition to your woodworking projects, so master woodworker George Vondriska shares his buying advice on what to look for when purchasing a dovetail jig. A WoodWorkers Guild of America (WWGOA) original video clip. Joinery Jig provided by Prazi. For more information, visit www.praziusa.com. More Videos from Prazi: Simplified Router Fence…

  • Make a Continuous Grain Box

    Make a Continuous Grain Box

    Woodworking expert George Vondriska demonstrates how to make a continuous grain box. A WoodWorkers Guild of America (WWGOA) original video. Dual Bevel Glide Miter Saw provided by Bosch. For more information, visit www.boschtools.com More Videos from Bosch: Function of Riving Knives for Table Saws Finish Nailer Buying Advice Tool Maintenance Using an Inspection Camera Tips…