Table Saw

  • How To Make a V-Block on the Table Saw

    How to Make a V-Block on the Table Saw

    A V-block is a must-have shop-made jig, especially for safely cutting round stock on the bandsaw. The easiest way to make one? Use a two-cut set up on the table saw and it’ll be V for victory.

    Read more »

  • How to Cross Cut Accurately on a Table Saw

    The table saw is perhaps best known for its prowess in lumber ripping operations, but with a little bit of time and setup, you can also learn how to cross cut like a boss on your table saw. It’s simple to turn your table saw into a precision cross cutting machine, and once you know… Read more »

  • How to Set a Miter Gauge for 45 Degrees

    Setting the miter gauge on your table saw to a perfect 45-degrees can be very challenging. And, if you’re planning on making picture frames, being just a tiny bit off will be a deal breaker. But here’s great news. You’ve probably already got a tool in your shop that will give you the precision you… Read more »

  • Spacers Create Perfect Dado Fit

    Sure, it’s great to cut dadoes using a dado head on a table saw, or a router bit on a router table or with a hand-held router. But there are instances where that may not work for you. Maybe you don’t own a dado head, or the right size router bit. Or maybe you’re only… Read more »

  • Cutting Precise Angles for a Custom Flag Case

    One of the most inspired and patriotic projects that a woodworker can build is a flag case. Building a flag display case primarily involves standard cabinetmaking tools and skills, but how on earth do you cut those sharp miters on the base? The base corners of a traditional flag case feature 45 degree angles, so… Read more »

  • Setting up a Table Saw Taper Jig Properly

    A taper jig is an effective tool to use in your shop to create perfect and consistent tapers on projects such as table legs that require a precise angle to achieve the look that you are going for. Setting up a taper jig, on the other hand, can be a frustrating experience. They often have… Read more »

  • Unsafe Cross-Cutting: Avoiding Dangerous Table Saw Kickback

    Table saw safety is a huge part of woodworking, and avoiding table saw kick back is a large part of table saw safety. You may find it tempting to try and use the rip fence on a table saw for cutting multiple pieces to the same size. There are scenarios in which this works, and… Read more »

  • Ideas for Removing a Rusty Table Saw Arbor Nut

    There can be real value in getting your tools used instead of new. However, used tools can have their “warts.” Every once in a while our readers, and the director of our woodworking videos, run into problems working with these older tools, and come to us with their questions. In this case, the table saw… Read more »

  • Resaw Shortcut Tip Using a Table Saw and Bandsaw

    Resawing is a great way to efficiently size your lumber to the desired thickness, and unlike planing to thickness which causes you to destroy the portion that you remove, with a resaw cut you can utilize both pieces. You can resaw narrow boards on a table saw, and wider boards on a bandsaw if yours… Read more »

  • Digital Angle Gauge

    Using a Digital Angle Gauge to Set Table Saw Miter Gauge Angles

    A table saw miter gauge is a handy “must have” accessory that can be used for a variety of applications. There are a variety of ways to set this up so that it is perfectly square, and George demonstrates a couple ways to do that here. Assuming that you have mastered the basics of how… Read more »