Gluing and Clamping

Sort by:

  • Spreading Glue with a Hacksaw Blade

    Spreading Glue with a Hacksaw Blade

    See how a regular hacksaw blade can be the best tool in your shop for spreading wood glue over the surface of a board or any wide, flat surface.

  • Uniform Glue Spreading

    Uniform Glue Spreading

    Master woodworker George Vondriska demonstrates a quick and easy way to evenly spread glue on your woodworking projects. A WoodWorkers Guild of America original video.

  • Toothbrush Glue Spreader

    Toothbrush Glue Spreader

    Sometimes you want to spread glue evenly over a joint surface on your woodworking projects, and George Vondriska teaches you how one of the best choices for applying the glue just might be an old toothbrush. A WoodWorkers Guild of America (WWGOA) original video.

  • Strength of Glue Joints

    Strength of Glue Joints

    How strong are the glue joints compared to the wood it’s holding together? Woodworking expert George Vondriska will explain in this video clip. A WoodWorkers Guild of America (WWGOA) original video.

  • Spreading Glue with Q-tips

    Spreading Glue with Q-tips

    Foe times when you need to get glue down into a joinery hole and achieving a strong joint, George Vondriska explains why the household Q-Tip just might be your best bet. A WoodWorkers Guild of America (WWGOA) original video.

  • Perfect Carcase Assembly

    Perfect Carcase Assembly

    With any carcase assembly, it can be tricky to put it together so it’s square when the glue dries. Master woodworker George Vondriska demonstrates a neat shop tip to guarantee even your most complicated carcase assembly is perfectly square. A WoodWorkers Guild of America (WWGOA) original video.

  • How to Use a Drill Press as a Clamp

    How to Use a Drill Press as a Clamp

    George Vondriska demonstrates how to use your drill press as a clamp. A WoodWorkers Guild of America (WWGOA) original video.

  • How to Clamp Irregular Shaped Objects

    How to Clamp Irregular-Shaped Objects

    Master woodworker George Vondriska shows you how to successfully clamp irregular shaped objects for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

  • Gluing with Off-Cut Strips

    Gluing with Off-Cut Strips

    Sometimes you need to carefully apply glue to a woodworking project to avoid squeeze-out, such as when getting glue into a mortise. George Vondriska reveals a DIY quick trick for gluing your project using something you might have in your trash can. A WoodWorkers Guild of America (WWGOA) original video.

  • Glue Removal Tip

    Glue Removal Tip

    If you use glue to join your work, you’ll inevitably have squeeze-out. There are several methods to remove glue from your woodworking projects, but George Vondriska reveals the best options. A WoodWorkers Guild of America (WWGOA) original video.