George Vondriska

Table Saw Joinery

George Vondriska
Sign in
Sign in or Get Access to view full class!
Table Saw Joinery
  • In-depth Instruction; over 80 mins
  • On-demand video access anytime
  • Bonus downloadable PDF resources
  • Access to class Q&A
  • Available for purchase: $39.99

If you want to build cabinets, vanities, book cases; dadoes and rabbets are a must-have joint. The key to a strong dado is a well-fitted dado. We’ll show you a simple shop-made jig that takes the guess work out of setting the dado head width for a perfect fit, and how to correctly use dado shims.

Dadoes -- 1:03
Rabbets -- 20:31
Single Blade Rabbet -- 26:53

When it comes to creating a strong corner, it’s hard to beat a half lap joint. There’s SO much surface area in the joint, it creates a great bond. We take this joint a step further by also teaching you rabbeted half laps; wonderful for picture frames.

Correctly sizing a tenon is critical to joint strength. We’ll show you three approaches to creating perfect tenons, so you’re sure to find one that works for you and your shop.

Half Laps – 0:05
Rabbeted Half Lap -- 7:10
Tenons -- 12:20
Dado Head Tenon -- 14:03
Tenon Jig -- 19:54
Double Blade Tenon -- 26:28

If shadow boxes are on your to-do list, you’ll love the cross halving joint. It provides a great way to join pieces edge over edge. A shop-made jig makes perfectly sizing your parts very easy.

Drawers take a lot of abuse, and require great joints so they stand up to the test of time. A dado head and a few test cuts, and our drawer joint technique will allow you to create rock solid corners AND cut the groove for the drawer bottom, all with one set up.

Cross halving – 0:05
Drawer Joint -- 4:10

George recaps the many joints covered in this class. When you learn what joint works best for the project at-hand, you’ll be a more efficient, successful, and satisfied woodworker.

 
 
4 Lessons
1  hrs 20  mins

Most woodworkers will agree that the table saw is at the heart of a woodshop, and is key to making quality woodworking projects. This video class will help ensure that you’re getting the most out of your table saw by increasing your table saw joinery “vocabulary.”

SKILLS TAUGHT

In this class, we’ll take you through the following joints, step-by-step:

  • Dadoes
  • Rabbets
  • Half Laps
  • Rabbeted Half Laps
  • Tenons
  • Cross Halving
  • Drawer Lock

In addition to showing you every detail required to master these joints, in many cases we’ll show you multiple approaches to making individual joints. This provides you with a handful of techniques, instead of just one, making it more of a sure bet that one will work great for you and your shop.

TOOLS USED

Much of the joinery work in this class will be done using a stackable dado head, accompanied by dado shims. We’ll show you how to use the dado head, configure it correctly to avoid chipping the dado’s teeth, build it up to a perfect width, and set its height. We’ll also show you when and where flat top grind saw blades are a must-have for joinery, a double saw blade set up for cutting tenons, the use of a tenon jig, and how to use a sacrificial fence.

RULES OF THE ROAD

There are general conventions for depth of dadoes and sizing of tenons. This class provides you with rules you can follow to make sure you’re getting the proportion right for strong joints.

MORE THAN JUST A VIDEO CLASS

In addition to the detailed video instruction you’ll receive, this online class provides you with some downloadable resources and helpful information to print and keep, including: A detailed Class Guide you can follow and use as a reminder for the key points of the class instruction; and a resources document that will help you find the products and elements you’ll see in the class.

NOTE: This Class video instruction is also available for purchase in DVD form. If you prefer to own a physical copy, you can purchase the Class DVD here.

George Vondriska

George Vondriska is the Editor in Chief here at Woodworkers Guild of America and has been sharing his woodworking expertise since 1986. Apart from conducting classes at his renowned Vondriska Woodworks School, George's passion for teaching has taken him to woodworking shows nationwide and has led him to teach woodworking for prestigious organizations such as Peace Corps/Swaziland, Andersen Window, Northwest Airlines, and the Pentagon. With a wealth of published magazine articles under his belt, encompassing tool reviews and shop improvement projects, George's knowledge and skills continue to inspire woodworkers every day. To discover more about him and his school, visit georgevondriska.com.

George Vondriska

Bonus materials available after purchase

Table Saw Joinery Purchase this class for $39.99.