WWGOA LIVE! September 2016

We had an excellent live stream, with no technical issues and great expertise help from Jim Heavey of WOOD Magazine. Glue ups to turning to screw selection, we covered a lot of ground.

0:23 Jim Heavey introduction
2:06 What type of wood screws for the shop?
4:11 Case hardening and table saw cuts
6:45 Depth of cut when routing a dado
9:08 Home center vs hardwood supplier material
11:10 Jim at The Woodworking Show
12:15 Using a hand planer to flatten wood
14:28 Using an abrasive cleaning stick on a surface sander
16:35 Tips for gluing up panels
19:28 Avoiding tear out when using a scraper on the inside of a bowl
24:08 Removing nails from reclaimed hardwood
27:56 Weekend with Wood 2017
29:30 What’s the deal with parallel jaw clamps?
33:54 Jointer or planer?
36:27 110 v or 220 v?
37:17 Hands on classes at Vondriska Woodworks
39:00 Food safe finish for hot drinks
42:00 Table saw blades
44:17 Sharpening on a WorkSharp 3000
47:55 Skydiving
48:56 Wiping glue?
51:15 Mill to final dimension, or wait a day?
53:30 Slow drying poly
55:45 Woodworking videos on a Shopsmith
57:00 Our viewers are from…

800x300-LIVE Page Banner v5

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

118 Responses to “WWGOA LIVE! September 2016”

  1. Michael Sinischo

    do you know anyone that does router work on wood in liviona mi Mike

  2. jcan819

    Liked the show watching in Iraq

  3. Chris

    Viewing from southern England, UK, on Friday.

  4. Frank

    Hope I can see the program this time without any trouble.

  5. ROBERT BURGY

    Nice job. Thanks. Robert from Stanwood Washington

  6. Roger Leclercq

    My first large tool was a craftsman radial arm saw at 110v it would stall and grab cutting anything bigger than a 2x4 . I converted it to 220v and i could go through a 2 x 12 and it wouldn't even slow down. I had an neighbor that was a electrical engineer he explained that at 220v the motor was being hit at 2 phase angles that doubles the torque.

  7. Jim Whiting

    Enjoyed the live broadcast tonight. I happened to find it rather than having scheduled it. Is there a time each month? Could this hour be noticed on your regular broadcast so that we can get to it on purpose instead by accident? Jim Whiting from Springville,Utah.

  8. VERNON

    WHEN USING A 15 TO 18 GAUGE NAIL GUN, I FIND A PAIR OF SIDE CUT OR FENCE PLIERS TO PULL THE NAIL OUT AT THE SAME DIRECTION THE NAIL WAS PUT , WATCHING N GOLDEN VALLEY ARIZONA

  9. Bruce

    for pallet wood check izzy swans video(https://www.youtube.com/watch?v=iszNusNVJ2k)

  10. VERNON

    WHEN USING A 15 TO 18 GAUGE NAIL GUN, I FIND A PAIR OF SIDE CUT OR FENCE PLIERS TO PULL THE NAIL OUT AT THE SAME DIRECTION THE NAIL WAS PUT