Accuracy and Repeatability The Leigh FMT Mortise and Tenon Jig is super fast at milling mortise and tenon joints. A little sibling to the industrially machined aluminum Leigh Pro FMT, this less expensive model is made out of 10 and 12 gauge bent and bolted steel. Arriving standard with the jig is a 5/16” spiral…
“George, I’m trying to repair an old chair that needs some type of filler to save the end of the tenon. I don’t think regular wood filler would hold up. They are not completely bad, but have some chips and splits. If you have a suggestion I would be thankful.” I’m throwing this one to…
Tips for Cutting Tenons with a Tenoning Jig Table Saw Tenoning Jig – Tracks in the miter gauge slot of a table saw. Work pieces are clamped upright against the vertical work support plate so saw cuts can be made in the end grain. The distance between the work support plate and the saw blade’s…
I remember, distinctly, the first time I used my mortiser. It was SO cool to be able to punch a square hole into a piece of wood, I had to run into the house and drag my wife back out to the shop to see it. OK, making a square hole wasn’t so hard, but…