Router Woodworking Basics: How to Use a Router

1 rbphoto2-router woodworking Want to use a router, but don’t know where to start? Learn how to use a router with these router woodworking techniques and tips.

Boy, I use routers a lot. They can do so much. From adding a profile to an edge to cutting dovetail joints, a router is an incredibly versatile machine. But if you’ve never used one, routers can be intimidating. This article provides buying advice on how to use a router along with tips to help you get started.

2 rbphoto1

Photo 1: Fixed Base Routers typically provide easy bit changes and bit height adjustments

Router Types.

Routers can be divided into two categories: fixed base and plunge base. On a fixed base router, once the bit is in and the base is locked, the bit is in a ‘fixed’ position, meaning its depth is set and will stay set (Photo 1).

3 rbphoto2

Photo 2: Plunge Routers excel at providing distinct starting and stopping points in a cut, often required for mortise and dadoes.

On a plunge base router, the bit can be locked in the router, then plunged in and out of the material (Photo 2).

Since the base on a fixed base router can typically be removed, bit changes are generally easier on a fixed base router than on a plunge router. Many woodworkers find micro-adjusting bit height easier on a fixed base router than a plunge router, which makes fixed base routers a popular choice for use with dovetail jigs, router tables, and other tools where bit depth can be fussy.

The big advantage of plunge routers is that, since they can plunge in and out of the material, you can easily make cuts with distinct starting and stopping points. This is useful when making mortises and dadoes. I also use a plunge router for making adjustable shelf holes in cabinets, and find it works much better than a drill.

4 rbphoto3

Photo 3: A multi-base router kit consists of one motor that fits both a fixed base and plunge base.

If you’re not quite sure which type of router would be best for you, have a look at multi-base router kits which are available from many manufacturers (Photo 3). Since the kits include a fixed base and a plunge base, they provide the best of both worlds. This give you lots of bang for your woodworking buck.

how to buy a router guide
5 rbphoto4

Photo 4: Variable speed is required for large diameter bits. The bigger the bit, the slower you can run the router.

Variable Speed

Variable speed is a must-have feature as you demand more of your router. Safety requires that you lower the router rpm (revolutions per minute) when working with large diameter bits (Photo 4). You absolutely cannot run large diameter router bits at full rpm. A router bit speed chart and other helpful tips can be found here.

6 rbphoto6

Photo 5: Router bits can be purchased with a 1/4" shank, left, or 1/2"shank bits whenever you can.

Router Bit Shanks

Router bits are available in two shank sizes, 1/4? and 1/2? (Photo 5). Given the choice, buy the bit with the 1/2? shank. There’s little, if any, price difference between the two. And the larger shank gives you two advantages. It helps stabilize the bit under cutting pressure so you get less chatter, which means a nicer cut (read less sanding). It also gives the collet (the chuck that holds the bit) more surface to grab, so there’s less chance of the bit coming loose.

7 rbphoto5 So when you’re router shopping you want to look for a machine that has both 1/4? and 1/2? collets. FYI, you may come across some router bits that have an 8-millimeter shank. These are used with a 1/2? to 8-mm reducer inserted into a 1/2? collet.

8 rbphoto7

Photo 6: Unplug the router and remove the base before changing bits. 2/3 of the bit shank should be inserted into the collet.

Installing Bits

The first step in changing router bits is making certain the router is unplugged. Additionally you’ll make your life easier, and bust fewer knuckles, if you remove the router base when installing and removing bits (Photo 6). When installing a bit in the router, set it so 2/3 of the shank is inside the collet, then tighten the collet.

How to Use a Router

9 rbphoto8

Photo 7: A router bad securely holds your work in place and allows you to rout all the way around the piece.

Secure Your Work

The last thing you want as you’re routing your material is to have to chase it across the shop. It needs to be secure to your bench. One solution is to clamp your material in place, but the clamp often gets in the way of the router and has to be repositioned. My preference is to use a router mat which provides an excellent non-skid surface (Photo 7). With your project on the mat you can work around all four edges without interference. You can find router mats at some home centers and woodworking specialty stores.

Here’s a tip. If it seems like your mat is losing its grip, rinse it under water to get the dust out of it. That usually helps restore some of its grab.

9 rbphoto9

Photo 8: Wear safety glasses and hearing protection whenever you're running a router.

Protect Yourself

Don’t even consider plugging the router in until you’ve got ear and eye protection on (Photo 8). Routers are loud enough to cause permanent damage to your hearing if you’re not protected. And you should, of course, always wear eye protection when using tools.

10 rbphoto10-routers woodworking

Photo 9: Rout the outside edge of a board in a counterclockwise direction.

Go In The Right Direction

In order to safely use a router, you’ve got to move it in the right direction. When routing the outside edge of a board, you should go counterclockwise (Photo 9). Going in the correct direction prevents the router from climb cutting and getting away from you.

11 rbphoto11-router woodworking

Photo 10: Rout the inside edge of a frame in a clockwise direction.

When routing the inside edge of a frame, move in a clockwise direction (Photo 10).

12 rbphoto12 - woodworking with routers

Photo 11: The correct sequence for routing all four edges of a board is to start on the end grain, then cut long grain, end grain, and long grain.

Start In The Right Spot

If you’re routing all four edges of a board, it’s important to make the cuts in the right sequence. Start on end grain (Photo 11). As the bit exits the end grain, it may slightly chip the adjacent edge. When you rout that edge you’ll automatically clean up any chipping.

Photos By Author

how to buy a router guide

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

93 Responses to “Router Woodworking Basics: How to Use a Router”

  1. Brenda LaSalle

    Had some old wood sashes I needed to make. So I picked up my dad's woodworking tools (3years after his passing) from his business to get the job done. I didn't realize how much technique there was to every tool he used. He made it all look so easy. I wish I had learned when he was still with us, but all these articles are a big help.

  2. Stephen Leydon

    Just getting into woodworking 60 years after Jr High wood shop class.

  3. Ross Patton

    Just signed up, I am a rookie. I retired several years ago and always wanted to do woodworking. I have done things in some ways reverse of most people. I have studied and bought the tools buying intermediate grade tools. I have virtually everything except a lathe. Now I need to learn how to use the tools properly. I look forward to reading and watching what is offered with the tool that intimidates me the most and I know the least about, the router

  4. Clive Harrod

    How to use a router

  5. Dennis

    How to use the machine for crowns and roses

  6. Zaheer Baber

    Very helpful article

  7. Benoit Robillard

    I am a beginner and my desire Is to work safely and intelligently. Thanx I want to work safely and intelligently. I am a beginner..rocky thank

  8. Jason Davis

    When using a router table, and using a round over bit on the inside of the work, what direction should you go?

  9. Trevor Arthur Walker.

    Bits sizes/shaft 1/4 or 1/2 charts

  10. Harold Morris

    Should have checked here as I bought a 1/4 shank. But for me it is going to work well. I love the information