Making Your Own Turning Blanks

ask WWGOA text with a man

“I had a nice cherry tree go down in my back woods that I would like to use for turning blanks. It is about a foot to 10” across. What is the best way to dry something like this?

WWGOA Editor Response:

If you want to turn the pieces as logs, which would make natural rim bowls, you don’t want them to dry at all. You want to keep them as wet as possible as long as possible. Logs don’t dry well, they’re prone to cracking. Coat the ends with paint to prevent water from escaping the end grain and, if the bark is on, leave it on to slow evaporation through the long grain. Cut it to a blank when you’re ready to use it.

If you want to have square turning blanks you can process the log on a bandsaw and make 2 x 2s, 3 x 3s, or bowl blanks. You should still paint the end grain to slow drying, but this material can be stacked and stickered to air dry.

Also, check out these related videos:

Cutting Lumber from Logs

Air Drying Fresh Cut Lumber

George Vondriska

Managing Editor

Got a woodworking question you need answered? Comment or Email us at editor@wwgoa.com

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

5 Responses to “Making Your Own Turning Blanks”

  1. Dan

    A good inexpensive way I found to keep the blanks from splitting or cracking is get the cheapest toilet wax ring , I get them from Home Depot for $1.49, melt it down and coat the end grain really good, haven't had any problems with cracking

  2. Colin

    I turn my bowls wet "green" and then let them dry in a cool area, introducingthem the haet gradually. this will not give aperfectly round bowl but induce interesting twist. Any cracks can be filled with resin or drill holes and introduce a lace to tie the crack . One other technique is to turn to a finish, place the bowl in the microwave hets for 30 secs then place bowl into a plastic bag and seal to retain any evaporating moisture. repaet daily until required dryness is obtained.

  3. tlsceo

    I had a nice 16in round Hickory log cutoff, but it began to split bad, so it band-sawed it to bowl blanks, and have had to cut them even smaller to get rid of the many splits and circular gain split or unwinding. How do I stop this and will they do it later?

  4. George

    If you want to make a bowl turn it over size.Take the saw dust& chips put it in a paper bag and cover the bowl with them.And then turn the bowl every month turn it for about 1 year tell its dry.And hope it doesn't crack to bad on you.And then finish it after its dryed.

  5. john glenn

    Instead of painting the ends of a log use yellow glue to coat the ends. Works great.