Premium Retention Test - Cordless Tool Station - Week 2

By George Vondriska

Cordless Tool Station

Week 2: Build And Attach Face Frame. Build And Install The T-Hangers.

Overview Video

DOWNLOAD PLAN

STEP BY STEP INSTRUCTIONS

Each of these steps should be worked on prior to our live session so you can bring any questions you may have to our live stream.

STEP 1: Determine lengths of face frame rails and stiles. Make face frame slightly, 1/16”, oversized. Measure from your case.

STEP 2: Cut face frame parts to size.

STEP 3: Drill pocket holes in rails.

STEP 4: Assemble face frame.

STEP 5: Glue face frame to case.

STEP 6: Cut the T-hanger parts. Double check that your tools will fit in the available hanger space. Adjust the hanger sizes as necessary

STEP 7: Assemble the T-hangers.

STEP 8: Install the hangers.

STEP 9: Flush trim face frame.

Live Event Video

More from this series:

Week 1

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

2 Responses to “Premium Retention Test - Cordless Tool Station - Week 2”

  1. jerry

    why not put inside piece in and then size frame. Don't have to cut down or plance pacers

  2. Byron Neal

    Thanks for a great series. I don't see on the website how to access these videos. I only see them as they come into my email inbox. I also don't get any warning about the live Q & A session. Again, only able to access this from my email. Please let me know what I am missing. Thanks again for all the great instruction. Byron