Benefits of a Cordless Workshop

Years ago, I was cutting lookouts into a gable end, trailing a mile of extension cord to the ground. Man, I thought, if only there was such a thing as a cordless circ saw. It was laughable at the time. Today, not so much.

picture of cordless tools on a work table

Cordless technology has changed so much in recent years. Nearly every tool is available in a cordless version, including high-power demand tools like table saws, chainsaws and air compressors. In addition to the usual suspects in the world of cordless drills, I’ve been using a track saw, trim router, miter saw, random orbit sander, multi-tool and jig saw. Here’s a look at how this science experiment has been going for me.

picture of a man using a cordless miter saw

Yeah, I’ve got plenty of outlets and ceiling power drops, but there’s something to be said for moving a tool anywhere you need it and not worrying about trailing a cord, or finding an extension cord, or locating an outlet, or creating a trip hazard. I’m very happy with the performance I get from cordless tools. This miter saw can make about 400 cuts between battery charges, and cuts as well as a corded saw.

close up of a cordless tool in use

On some tools, cords just plain get in the way. Of course, when you go cordless that’s no longer an issue. I find this is a great benefit, especially on routers and sanders.

close up of a cordless sander in use

Being able to grab and go is a great benefit. No need to find an extension cord or look for an outlet. It doesn’t matter where I want to work, inside or outside my shop. Provided the battery is charged….

close up of a cordless tool in use

Plenty of my tools get used in the shop AND remotely. When it comes to portability, cordless is the bomb.

All of the cordless tools I’m currently using perform very well and I don’t feel there’s any compromise between what the cordless tools do for me and what similar, corded tools do for me. I find that, without thinking about it, I’m typically grabbing the cordless tool instead of a corded tool I’m excited to continue to add corded tools to my shop and see where this goes.

The battery platform becomes a sticky wicket. If you stick with one manufacturer you can, probably, get one set of batteries that you can use in a bunch of different tools. If you use tools from a variety of manufacturers, or use tools with an array of voltage requirements, you’re going to need to stock an assortment of batteries. High-power demand tools like table saws and chainsaws use high voltage batteries that may not be compatible with smaller tools like routers and sanders.

What I Like

  • Convenience
  • Portability
  • Great performance
  • Choose a platform and look for tool-only deals to save money on the purchase
  • Battery technology has improved to a point where there’s LOTS of run time per charge

What I Don’t Like

  • Different tools may use different battery platforms, and batteries are expensive
  • If you don’t charge the battery, you don’t have a tool
  • Batteries wear out and need to be replaced
  • The variety of battery platforms

Tools are an expensive investment. Be sure to check out our product reviews for tool buying advice.

Sources

Milwaukee 10” miter saw 2734-20 – https://www.milwaukeetool.com/

Ridgid Cordless Compact Router – www.homedepot.com

DeWalt 5” Random Orbit Sander DCW-210 – www.dewalt.com

DeWalt Track Saw DCS520ST1 – www.dewalt.com

Reply to Ryan J Nedela
  • (will not be published)

4 Responses to “Benefits of a Cordless Workshop”
  1. Rob Lessar
    Rob Lessar

    IMO smaller tools like drills, nut drivers win out portable but sanders, chain saws, routers etc eg higher power draw tools are still better corded. Heck better a cord than a heavy battery that doubles the tool weight. IMO a miter saw is a prime example.

    Reply
  2. WALDRON
    WALDRON

    I too like battery powered tools. The battery platforms can be frustrating however there are adapters for batteries which allow use across several platforms. I plan on switching from my corded compound sliding mitre saw to a battery powered one in the future to promote portability should I need it.

    Reply
  3. Ryan J Nedela
    Ryan J Nedela

    I am loving technology these days. But for the first time in my 24years career at Job interview, was asked how many battery operated tools I had. I actually was offended. I have 12inch compound miter w/stand. Belt sander, router, orbital, palm sander, Dremel, my last raise was a sweet $5.00. was told I can do any job handed to me. I think the pro”s and cons even both out. I may run 5 cords out to get going. But my screwguns have decent batteries. Maybe change out once twice daily. But I’ve seen guys at there charging stations for 30 minutes a day(cause there phone is charging there too) I agree small tools(if can afford them with kids in house) are cool battery, but I beleive a jobsite with cords will just teach these young kids, what Our mentors taught us. We didn’t have this crap when I started my career, this is how we do it. I think it makes men out of these young kids. Jobsites are not meant to be silver platters,

    Reply
  4. Jerry Romines
    Jerry Romines

    You are right about the cordless power tools being the BOMB. I love my cordless power tools for the freedom of movement without the tail along cord.

    Reply