Ask WWGOA: How to make an Angled Cut Without a Bandsaw

Ask WWGOA Banner

Question


I am working on a project and need to make an angled cut, but do not have a bandsaw to make the 70 degree point. I am thinking I can use my table saw with the blade tilted. Or, with it on its tall side and use the miter gauge. Any guidance or pointers?

Submitted via email


Answer


You could do this pretty quickly and very safely with a hand plane. Ideally use a low angle plane to minimize the tear out, but any hand plane would do ok with this. You could also set it vertically on a table saw to make a cut, making the cut while the board is still long. You will need to use a jig to hold the work piece securely through the cut. Also, the angle is not critical. You could simply lay the board flat and cut it to a 45 degree angle as well. The only purpose for the angle is to help make it easier to get the burn-in started, so a 45 degree angle would do fine but just take slightly longer to get started. Not a big deal, however.

Hope this helps,
Paul


Related:
Set Up Your Miter Saw For Perfect Cuts

Do you have a woodworking question you’d like answered by an expert? Email your question to editor@wwgoa.com or reach out to us on Facebook.

Please note: questions may be edited for clarity and relevance.


10 Quick and Easy Gift Ideas

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

15 Responses to “Ask WWGOA: How to make an Angled Cut Without a Bandsaw”

  1. worldtimepost news company

    WOODWORKING

  2. deb schroeder

    Do you have a segment and stave calculator if so how do I get to it

  3. Michael

    Can you recommend an HVLP sprayer kit for $500 or less?

  4. ponzia

    I am making an arch cabinet front. what would be the best way to glue 12 pieces together vertically where clamping is not an option?

  5. Sam Maxi

    I looking for a guide about making an angled cut without a bandsaw and I got my answer by reading this post. Thank you.

  6. MICHAEL

    why whenever I cut on my table saw whether it is cross cut or with grain I seem to get blade burn marks on my wood I have fitted a new blade

  7. David McCoy

    I am having issue with my Bandsaw. It is not cutting the product properly. I cant cut wood accurately.

  8. Ryu

    Nice question and useful information, thank you

  9. Avion John

    Awesome guide it helps a lot.

  10. Bob

    What size triangle to do I need to make for a 3 ft. X 5 ft flag?