WoodWorkers Guild of America » General Discussion

1. 

   Member Comment
   

   Member Comment
   Joined: Apr '10
   Posts: 171

   Jan. 03, 09 - 11:13PM

   I am new to WWGOA and on number 2 video series. I was wondering if there is a material cut list for the projects.

   Submitted: Riverhoop

   # Posted 3 years ago
2. 

   Member Comment
   

   Member Comment
   Joined: Apr '10
   Posts: 171

   Jan. 09, 09 - 07:36PM

   Wondering the same thing. If you hear let the rest of us know. Thanks.

   Submitted: Nag

   # Posted 3 years ago
3. 

   Editor
   

   Editor
   Joined: Apr '10
   Posts: 84

   Jan. 14, 09 - 01:54PM

   Thanks for the question. Following is a cut list of the materials used in DVD 2.

   - Nancy Crowe, Webmaster

   Note: Rail and slat lengths include ½-in. long tenon per end. Material used is oak.

   4 Legs: (1-1/2 x 1-1/2 x 21-1/4) Cut these parts 24-in. long. Cut to finished length after mortising.
   2 Upper rails, long: (¾ x 2 x 17)
   2 Upper rails, short: (¾ x 2 x 13)Cut kerf for table top fastners
   2 Lower rails: (¾ x 3 x 13)
   6 Vertical slats: (½ x 1-1/2 x 14)Cut these parts to finish length after the mortises are cut.
   2 Shelf supports (¾ x 1-1/2 x 11-1/4)Drill oversized holes for screws
   1 Shelf(¾ x 11-3/4 x 16-11/16) Cut shelf to final size after leg and rail assembly is glued. Take dimensions directly from table.
   1 Top (¾ x 18 x 22)
   4 Table top fasteners

   Submitted: Nancy Crowe, Webmaster

   George Vondriska, Editor

   # Posted 3 years ago

Reply

You must Log In to post.